Default Belkin Router Password
The default Belkin router password is no password at all. Leave the field blank. This will not work for routers that have previously been configured, as a password would have been added during the initial configuration. If this is the case, you will need to examine the router for the tiny recessed button on the back that resets the router to factory defaults. Belkin different routers that have various methods for resetting it. Some will require that you leave the device plugged in while depressing the button for seven seconds. Some will require that the router be turned off. You can find specific setup and restore setting for your Belkin router on their website. But a few quick tries with both methods should work.
You will then need to open your web browser and type http://192.168.2.1 and hit enter. You should see the login screen. Just hit enter with no password and go about configuring your router. Be sure to add a password and setup and wifi security, such as WPA-2 so users will require a password to get onto your wifi network.
Keep in mind you can get the complete setup guide from Belkin. This is recommended, especially if the password and reset option we provided above does not work with your particular Belkin router model.
Related Info:
Routers may provide connectivity inside enterprises, between enterprises and the Internet, and inside internet service providers (ISPs). The largest routers (for example the Cisco CRS-1 or Juniper T1600) interconnect ISPs, are used inside ISPs, or may be used in very large enterprise networks. The smallest routers provide connectivity for small and home offices.
[edit] Routers for Internet connectivity and internal use
Routers intended for ISP and major enterprise connectivity almost invariably exchange routing information using the Border Gateway Protocol (BGP). RFC 4098[3] defines several types of BGP-speaking routers according to the routers' functions:
- Edge Router: An ER is placed at the edge of an ISP network. The router speaks external BGP (EBGP) to a BGP speaker in another provider or large enterprise Autonomous System(AS). This type of routers is also called PE (Provider Edge) routers.
- Subscriber Edge Router: An SER is located at the edge of the subscriber's network, it speaks EBGP to its provider's AS(s). It belongs to an end user (enterprise) organization. This type of routers is also called CE (Customer Edge) routers.
- Inter-provider Border Router: Interconnecting ISPs, this is a BGP speaking router that maintains BGP sessions with other BGP speaking routers in other providers' ASes.
- Core router: A Core router is one that resides within an AS as back bone to carry traffic between edge routers.
-
- Within an ISP: Internal to the provider's AS, such a router speaks internal BGP (IBGP) to that provider's edge routers, other intra-provider core routers, or the provider's inter-provider border routers.
- "Internet backbone:" The Internet does not have a clearly identifiable backbone, as did its predecessors. See default-free zone (DFZ). Nevertheless, it is the major ISPs' routers that make up what many would consider the core. These ISPs operate all four types of the BGP-speaking routers described here. In ISP usage, a "core" router is internal to an ISP, and used to interconnect its edge and border routers. Core routers may also have specialized functions in virtual private networks based on a combination of BGP and Multi-Protocol Label Switching (MPLS).[4]
Routers are also used for port forwarding for private servers.
Link to this page
